- ZB-B series dosing melt pump for hig
- ZB-C series plastic melt pump for ex
- ZB-D series extruding pump for polym
- ZB-E series pressurized melt pump fo
- ZB-H series high temperature and hig
- ZB-R series gear melt pump for rubbe
- ZB-K series polymer melt pump for re
- ZB-F series melt pump for reaction k
- ZB-U series gear metering spinning p
- BATTE ZB-X series chemical transport
- continuous feeding system
- Liquid loss in weight feeder
- Volumetric Feeder
- Multi-component loss in weight feede
- Micro loss in weight metering feeder
- Single screw gravimetric dosing feed
- Twin screw loss in weight metering f
- plastic extrusion screen changer
- screen melt filter for extrusion pla
- Manual control screen changer
- Double plate continuous hydraulic sc
- Automatic mesh belt continuous scree
- Double piston four screen cavities c
- Single plate double screen cavities
- Single piston double screen cavities
- Double piston four screen cavities b
- Double piston double screen cavities
- Batte Machinery Zhengzhou Co., Ltd.
- E-mail: firstname.lastname@example.org
- Skype: Battemachinery
- Tel: +86 371 67991755
- After-sales Tel: +86 371 67997677 / 67997877
- Mob: +86 15838331071
- Address: No.11 Changchun Road, High & New Technology Development Zone, Zhengzhou, China.
- melt gear pump for plastic extrusion
- recycling screen changer
- 2018 Chinaplas for Rubber and Plasti
- Batte Melt Pump Brief Introduction a
- Loss-in-weight Feeder for Masterbatc
- Batte export loss in weight gravimet
- Batte will attend 2017 Chinaplas for
- Melt Pump Installation Schemes
- Loss in weight feeder application
- Structure of Batte spinning pumps
ZB-U series gear metering spinning pump
Introduction of Spinning pump
ZB-U series spinning pump is a metering pump in the form of gear,which is one of the key components of the spinning machine.The main purpose of the spinning melt pump is to distribute the spinning melt evenly and equally to the silk assembly.Microporous cooling solidification into a wire.
Application of Spinning pump extrusion
Extrusion spinning pump is main part of spinning machine, spinning melt pump is mainly used for transporting the spinning melt to the next spinning machine part equably, and spinning pump will curdle to silk via the spinneret plate.
ZB-U series spinning pump is suitable for chemical, chemical fiber, biological, pharmaceutical and other industries, and widely used in precision measurement of polyester, nylon, spandex, carbon fiber, Kevlar, PSA, high-strength polyethylene, acrylic, polypropylene, vinylon, acetate fiber, viscose fiber, chemicals, oil, paint, thickeners, etc.
Features of Spinning melt pump
◆ Lubrication system: the spinning pump can be lubricated by the spinning melt.
◆ Mechanical sealing: each parts work closely, and mechanical sealing can prevent the leakage of the melt.
◆ Good wear properties: the material for pump body is suitable for the high temperature and high pressure condition.
◆ Can meet the requirements of high pressure spinning (300-500kg/cm²)
Parameters of Spinning pump
|Capacities||0.3cc/rev to 100cc/rev|
|Viscosity||Up to 600 poise|
|Temperature||Up to 100°centigrade|
|Pressure||Up to 40 Kgf(differential)|
|Material||High grade heat treated alloy steel, depending on application|
|Speed||Up to 120 RPM|
Structure of Spinning gear pump:
Previous：PID Control System for extrusion
Next：BATTE ZB-X series chemical transporting and dosing pump