BATTE Machinery China
Skype: Battemachinery    HOT LINE: +86 371 67991755      EMAIL: info@battemachinery.com
Batte melt pump > polymer melt pump > melt pump for plastic extrusion

melt pump for plastic extrusion

The extrusion melting melt gear pump is mainly used to connect the extruder or die. They reduce pulsation and instability in conveying, especially for single-screw extruders. The extrusion pump is also used as a melt pump to increase the pressure to meet the requirements of the subsequent process. It is much more effective to build up pressure through a gear melt pump than the extruder itself. With the extrusion pump, the pressure of the extruder can be greatly reduced. In particular, the heat introduced into the polymer can be significantly reduced. The melt pump can transport the material as smoothly as possible. BATTE extrusion pump is indispensable in the production of precision films or micro-particles.

The professional melt pump for extruder selects external meshing cylindrical gears (straight gears, helical gears, herringbone gears) to obtain accurate fluid volume by relatively rolling, high-precision gear gap and volumetric structure planning, which can be used in a stable and balanced manner. A kind of high temperature and high viscosity polymer melt transportation, pressurization and metering.

The amount of regrind can be increased up to 100% by using an extrusion melt pump. PET, PBT, PA, PC, PS, SAN, ABS, HIPS, PP, PE, POM, etc. High-viscosity melt pump are widely used in plastics, resins, rubber and chemical products extrusion. Such as: granulation, film, pipe, plate, sheet, synthetic fibers, fiber optics, medical plastic catheters and other industries.

ZB-B standard melt pump

ZB-B standard melt pump

  1. label    extrusion pump
  2. label    electric
  3. label    Viscosity: ≤40000Pa.s.
  4. label    Working temperature: ≤400℃ (750℉)

ZB-B series standard polymer extrusion pump are mainly used for pressurization and stable flow delivery of extruders or medium and high viscosity polymers. The heating method is mainly electric heating. Suitable for PS, PP, PET, PVC, PC, PMMA, PA, ABS, PE-LLD and other processes.

ZB-C Enhanced Melt Pump

ZB-C Enhanced Melt Pump

  1. label    extrusion pump
  2. label    electric
  3. label    Viscosity: ≤40000 Pa.s
  4. label    Temperature: ≤400℃ (750℉)

The pressure requirements on the screw are reduced. The original screw is used to build pressure to the die, and the extrusion melt pump is changed to build pressure to the die. The screw can be extruded at high speed and efficiency, and the back pressure of the extruder can be adjusted to reduce the melt flow.

ZB-H high temperature and high pressure melt pump

ZB-H high temperature and high pressure melt pump

  1. label    extrusion melt gear pump
  2. label    electric
  3. label    Viscosity: ≤40000 Pas
  4. label    Temperature: ≤510℃(950℉)

ZB-H series high temperature and high pressure extrusion melt pump is suitable for engineering plastics, blown film and other processes, and is suitable for high pressure working conditions such as HDPE and PEEK.It can effectively reduce the unstable material output and pressure pulsation caused by the extruder parameters.

ZB double shaft drive melt pump

ZB double shaft drive melt pump

  1. label    extrusion pump
  2. label    electric
  3. label    Viscosity: ≤40000 Pas
  4. label    Temperature: ≤400℃ (750℉)

The dual-axis drive extrusion melt pump is an extended version of the ZB-B series, which is mainly used for pressurization and stable flow delivery of extruders or medium and high viscosity polymers. The heating method is mainly electric heating. Suitable for PS, PP, PET, PVC, PC, PMMA, PA, ABS, PE-LLD and other processes.

melt pump for pvc extrusion

melt pump for pvc extrusion

  1. label    PVC extrusion pump
  2. label    electric
  3. label    Viscosity: ≤40000 Pa.s
  4. label    Temperature: ≤400℃ (750℉)

PVC special melt gear pump for plastic extrusion is specialized in conveying, pressurizing and measuring polyvinyl chloride (PVC) high viscosity polymers.PVC melt pump is mainly composed of pump casing, driving gear, driven gear, sliding bearing, front and rear end plates, packing seal, etc.

ZB-E round body melt pump

ZB-E round body melt pump

  1. label    extrusion pump
  2. label    electric
  3. label    Viscosity: ≤40000 Pas
  4. label    Temperature: ≤400℃ (750℉)

ZB-E series round body extrusion melting melt pumps are mainly used for pressurization and stable flow delivery of extruders or medium and high viscosity polymers. The heating method is mainly electric heating. Suitable for PS, PET, PVC, PC, PA, PMMA, HDPE, LDPE, LLDPE, PP, and other processes.

Other hot melt pump

  1. ZB-D series extruding pump for polymer

    ZB-D series extruding pump for polymer

  2. ZB-H series high temperature and high pressure melt pump for blown film

    ZB-H series high temperature and high pressure melt pump for blown film

  3. ZB-R series gear melt pump for rubber extruder

    ZB-R series gear melt pump for rubber extruder

  4. ZB-K series polymer melt pump for reaction kettle

    ZB-K series polymer melt pump for reaction kettle

Inquiry

  • 1.Fill in and submit the below form;
  • 2.Fill in security code;
  • 3.Submit successful,we will contact you within 24 hours!

hot melt filter screen changer vedio

  • batte screen changer
  • batte melt pump
  • Single screw gravimetric dosing feeder
  • Multi-component loss in weight feeder
  • ZB-F series melt pump for reaction kettle
  • PLC Control System for extruder