- ZB-B series gear melt pump for high
- ZB-C series plastic melt pump for ex
- ZB-D series extruding pump for polym
- ZB-E series pressurized melt pump fo
- ZB-H series high temperature and hig
- ZB-R series gear pump for rubber ext
- ZB-K series polymer melt pump for re
- ZB-F series melt pump for reaction k
- ZB-U series gear metering spinning p
- ZB-X series chemical transporting an
- Liquid loss in weight feeder
- Volume feeding machine
- Multi-component loss in weight feede
- Micro loss in weight metering feeder
- Single screw gravimetric dosing feed
- Twin screw loss in weight metering f
- Manual control screen changer
- Double plate hydraulic screen change
- Automatic mesh belt continuous scree
- Double piston four screen cavities s
- Single plate double screen cavities
- Single piston double screen cavities
- Double piston four screen cavities b
- Double piston double screen cavities
- Batte Machinery Zhengzhou Co., Ltd.
- E-mail: email@example.com
- Skype: Battemachinery
- Tel: +86 371 67991755
- After-sales Tel: +86 371 67997677 / 67997877
- Mob: +86 15838331071
- Address: No.11 Changchun Road, High & New Technology Development Zone, Zhengzhou, China.
- Batte export loss in weight gravimet
- Batte will attend 2017 Chinaplas for
- Melt Pump Installation Schemes
- Loss in weight feeder application
- Structure of Batte spinning pumps
- Advantages of Batte gear spinning pu
- Effect of structural features of the
- Effect of material properties for in
- BATTE May is thriving!
- K 2016-The world’s No.1 Trade Fair
ZB-E series pressurized melt pump for extruder
Name: ZB-E series pressurized melt pump for extruder
Introduction:ZB-E series pressurized melt pump is mainly used for extruder or middle-high slimy medium feeding,suitable for PS, PET, PVC, PC, PMMA, PA, HDPE, LDP, ...
Manufacturer: BATTE Machinery China
Introduction of Pressurized melt pump
Pressurized melt pump is mainly used for extruder or pressurization, stabilizing flow and transportation of medium or high viscosity polymer. This pressurized pump adopts electric heating, and appliers to PS, PET, PVC, PC, PMMA, HDPE, LDPE, LLDPE, PP, etc.
Technical Parameter of Pressurized gear pump
◆ Melt Pump Body: High Temperature Tool Steel or Chromium-nickel Steel
◆ Gear: Stainless Steel, Nitrided Steel, or Customization
◆ Tooth profile: Straight tooth, Helical tooth, Herringbone tooth
◆ Sliding Bearing: High Temperature Tool Steel, special material and wear-resistant coating
◆ Shaft Sealing: Screw sealing, Packing seal, Screw sealing+Packing seal, the other combined sealing
◆ Heating System: Conduction oil heating
Operating Parameter of Pressurized pump
◆ Volume Range: 0.5CC - 2500CC
◆ Viscosity: ≤40000 Pas
◆ Working Temperature: ≤400°C
◆ Cleaning Temperature: ≤450°C
◆ Outlet Pressure: ≤12MPa
◆ Differential Pressure: ≤25Mpa
Advantages of Gear pressurized pump
◆ Stable output pressure, can effectively reduce the extrusion parameters caused by the unstable output of material and pressure pulsation.
◆ Improve the quality of the product dimensions and tolerances -- will minimize the extrusion products, reducewaste and scrap rate. Common extrusion machine can produce high precision products.
◆ Increase the output, reduce the pressure of the screw, the screw to die pressing, to melt pump to the die headpressure, the screw can be high speed extrusion, and can adjust the pressure to reduce the extruder, meltresidence time in screw cylinder, stable plasticizing process, reduce the melting temperature, improve the yield and quality of products.
◆ Reduce unit energy consumption, data showed that the same granulation to twin screw extruder and melt pump combination, the mixing quality and yield is greatly improved than the twin-screw granulator unit separate. Energy consumption per kilogram of materials processing can be reduced by about 1/4.
Parameter of Melt pump
|Type||CC/Rev||Capacity (L/H)||Heating power (kw)||Dirven system (kw)||Pressure||Temperature|
Exit pressure: ≤35Mpa
Next：PLC Control System for extruder