Zhengzhou batte screen changer manufacturers share the solution method for meltblown screen changer

Zhengzhou Bart, a professional manufacturer of screen changers in China, provides some suggestions for the leakage of screen changers. Regarding the material leakage of the screen changer, whether it is a plate hydraulic screen changer, a double-column hydraulic screen changer or a mesh belt type automatic screen changer, the first thing to look at is where the material is leaking.

1. Leakage from the connection between the flange and the screen changer: it is because when the melt blown screen changer is installed, there are impurities on the end face of the connecting ring that have not been cleaned, or the bolts of the flange are not tightened diagonally, flange and screen changer If the connecting end surface of the filter is not flat, clean up the waste at the connection between the screen changer and the flange after disassembling, and tighten the bolts diagonally to ensure that the gap between the flange and the screen changer is the same.

2. Leakage in the gap of the heating ring of the screen changer: The pressure sensor hole reserved at the inlet of the screen changer is not plugged, or the plug is not tightened, just tighten the pressure sensor or the pressure sensor plug.

3. Material leakage at the connection between the screen changer slide plate and the main body of the screen changer: The assembly quality of the screen changer is problematic, and material leakage occurs just after installation. Return to the factory for reassembly. If there is a material leakage problem during the warranty period, on-site repair or return to the factory for repair, if the material leakage occurs again after the repair, a new machine will be issued.

4. The column screen changer has a material leakage problem during the warranty period and needs to be returned to the factory for repair (the column screen changer itself is heavy and requires high assembly accuracy, disassembly and assembly require professional and technical personnel). Material leakage due to strain on the column and main body shall be dealt with separately.

5. The material leakage problem of the mesh belt type automatic screen changer is mainly caused by the water volume of the circulating water path is too small or blocked to be able to cool and seal. Increase the cooling water flow rate and clean up the scale in the cooling water path in the screen changer. It can be solved.