Melt pump used in polypropylene yarn extrusion production line

The application of melt pumps in polypropylene yarn extrusion lines holds significant importance. They are primarily used for the conveyance, pressurization, and metering of high-temperature, high-viscosity polymer melts, significantly enhancing extrusion output, product quality, and reducing unit energy consumption. Below is a detailed analysis of the roles of melt pumps in polypropylene yarn extrusion lines:

1.Pressure Stabilization and Pressurization Capabilities

Melt pumps exhibit remarkable pressure stabilization and pressurization characteristics. With a stable extruder or screw speed, adjusting the pump's rotational speed can achieve a reduction in melt inlet pressure and an increase in outlet pressure, thereby meeting the pressure requirements during production. This function ensures the stability of the melt during the extrusion process, contributing to improved quality of the extruded products.

2.Enhancement of Product Quality

Melt pumps can continuously pump precise amounts of material to the extruder head, reducing the tolerances of the extruded products and improving product precision and consistency. In the process of polypropylene yarn extrusion, the use of melt pumps can reduce waste and defective product rates, increasing the number of qualified products produced per unit weight of material. This is particularly important for products requiring strict dimensional tolerances or high raw material costs.

3.Increase in Extrusion Output

The application of melt pumps reduces the pressure requirements on the screw. In traditional extrusion processes, the screw bears the responsibility of building pressure towards the die head, while melt pumps can take over this function, allowing the screw to extrude at high speeds and efficiencies. Additionally, melt pumps can regulate the extruder backpressure, reducing the residence time of the melt within the screw barrel, stabilizing the plasticization process, and lowering the melting temperature, thereby increasing product output and quality.

4.Reduction in Unit Energy Consumption

Combining melt pumps with extruders can significantly improve mixing quality and output. Data shows that using a co-rotating twin-screw granulating extruder in combination with a melt pump significantly enhances both mixing quality and output compared to standalone twin-screw granulating units. Simultaneously, the energy consumption per kilogram of material processed is also notably reduced. This is of great significance for lowering production costs and improving economic benefits.

5.Optimization of Production Line Configuration

In polypropylene yarn extrusion lines, multiple extruders can simultaneously feed into a single melt pump. The melt material is combined, pressurized, and metered by the melt pump before being supplied to the die head for extrusion. This configuration enables the use of small-to-medium-sized extruders to produce large-sized products, such as large-diameter pipes and wide sheets. Additionally, this configured production line features a compact structure and a small footprint, facilitating cost savings and increased production efficiency.

In summary, melt pumps offer significant application advantages in polypropylene yarn extrusion lines. They not only improve product quality and output, reduce unit energy consumption, but also optimize production line configurations and enhance production efficiency. Therefore, the rational use of melt pumps in the process of polypropylene yarn extrusion holds great significance.

Email: info@battemachinery.com

WhatsApp: +86 158 38331071