manual filter screen changer

Manual Screen Changer, is a device used in industrial production to change screens to maintain a smooth production process. The following is a detailed analysis of this equipment:

I. Definition and use

The manual screen changer is mainly used to change the screen by manual operation when the screen in the production line is clogged or needs to be replaced, so as to ensure the continuity and stability of the production process. It is widely used in many fields such as plastic extrusion, chemical industry, food processing, etc., especially in the occasions where the screen needs to be cleaned or replaced regularly.

Structure and working principle

Structure: Manual screen changer usually consists of screen, screen holder, replacement mechanism and other parts. The screen is used to block impurities, the screen holder is used to support the screen, and the replacement mechanism is used to replace the screen manually.

Principle of operation: When the screen is clogged or reaches the replacement cycle, the operator manually operates the replacement mechanism to remove the old screen from the screen holder and install a new screen. This process usually needs to be carried out under stoppage or deceleration to ensure the safety and accuracy of the operation.

III. Features and Advantages

Easy to operate: The manual screen changer is easy to operate and easy to master as it is manually operated and does not require a complex electrical or hydraulic system. Low maintenance cost: Since there is no need for complex electrical or hydraulic components, the maintenance cost of the manual screen changer is relatively low. At the same time, the screen, as a wear part, its replacement cost is also relatively low. Strong adaptability: the manual screen changer is suitable for a variety of different production environments and process requirements, with a strong adaptability.

IV.Application Examples

In the field of plastic extrusion, manual screen changers are widely used in the extrusion process of plastic pellets. Since plastic pellets may contain impurities or uneven particle sizes, they need to be filtered through a screen. When the screen is clogged, the operator can manually change the screen to ensure the continuity and stability of the extrusion process.

Regular screen replacement: In order to ensure the smoothness of the production process and product quality, the screen should be replaced regularly to avoid production interruption due to screen clogging.

Operational safety: When replacing the screen, make sure the equipment has been stopped or slowed down, and follow the relevant safety regulations to avoid accidents. Maintenance: Regularly maintain the manual extruder screen changer, check its working condition and performance, and ensure its long-term stable operation.

Email: info@battemachinery.com

WhatsApp: +86 158 38331071