FDY (Fully Drawn Yarn) melt pump

The FDY (Fully Drawn Yarn) melt pump is a crucial piece of equipment specifically utilized in the FDY production process. Its primary functions encompass the conveyance, pressurization, and metering of high-temperature, high-viscosity polymer melts. Below is a detailed introduction to the FDY melt pump:

I. Definition and Functions

Definition: The FDY melt pump is a positive displacement delivery device that transports melt through the volumetric changes created by the intermeshing of gears.

Functions:

Conveyance: Primarily used for conveying high-temperature, high-viscosity polymer melts, such as polyester (PET), among others.

Pressurization: Increases the pressure of the high-temperature melt emanating from the extruder to meet the subsequent process requirements.

Metering: Capable of precisely metering the volume of melt conveyed, ensuring accurate material usage throughout the production process.

II. Working Principle

Similar to conventional melt pumps, the FDY melt pump relies on the volumetric changes generated by the intermeshing of the driving and driven gears to transport the melt. As the gears rotate in the prescribed direction, the melt enters the tooth spaces in the feed zone between the two gears. With the rotation of the gears, the melt is carried into the conveying zone from both sides. The remeshing of the gears then extrudes the melt from the tooth spaces into the discharge zone, where it is pressurized and sent to the outlet pipe. As long as the pump shaft rotates, the gears continuously pressurize and convey the melt towards the outlet, enabling the pump to achieve high outlet pressures.

III. Composition and Structure

The FDY melt pump primarily comprises the following components:

Pump Housing: Encloses the gears and other components.

Driving and Driven Gears: Intermesh to convey the melt.

Sliding Bearings: Support the gears and reduce friction.

Front and Rear End Plates: Secure the bearings and gears in position.

Packing Seals: Ensure the pump's sealing integrity, preventing melt leakage.

IV. Characteristics and Advantages

Precise Metering: Enables precise control over the melt's delivery volume, enhancing product quality stability.

High-Pressure Output: Capable of achieving high outlet pressures, meeting the pressure demands of FDY production.

High-Temperature and High-Viscosity Resistance: The pump body and components are made of superior materials that withstand high temperatures, corrosion, and are suitable for conveying high-temperature, high-viscosity polymers.

Energy Saving and Consumption Reduction: By pressurizing and conveying the melt with stable flow, it mitigates material output instability and pressure pulsation caused by extruder parameters, thereby improving production efficiency and product quality.

V. Application Scenarios

The FDY melt pump is widely employed in the spinning production process of polymeric materials such as polyester fibers (PET), particularly in scenarios requiring the conveyance, pressurization, and metering of high-temperature, high-viscosity polymer melts.

VI. Precautions

When using the FDY melt pump, select the appropriate pump model and parameters according to specific process requirements.

Regularly inspect and maintain the pump body and components to ensure its normal operation and extend its service life.

Emphasize safe operation to prevent accidents such as melt leakage and burns.

In conclusion, the FDY melt pump is an indispensable key equipment in the FDY production process. Its precise metering, high-pressure output, and capability to handle high-temperature, high-viscosity materials provide robust support for producing high-quality products.

Email: info@battemachinery.com

WhatsApp: +86 158 38331071